Honda FRV - EDIX - other wiring

Honda FRV - EDIX other wiring

Wire routing speaker and video The speaker wires are on the left, the video cables on the right side.
Head unit wires protected Also the AINET cable and the optical wire are protected with snakeskin (green mark).
Head unit wireing In this picture you can see AINET and optical wire as they are routed on the left side to the seat bench (green).
Head unit wireing AINET and optical wire are routed on the left side (green).
Display 1 wireing termination The display is connected with an all-in-one cable.
Headunit and display 1 wireing The display wires are routed on the right side to the the trunk area. The middle of the passanger side is used for headunit.
Headunit and display 1 wireing This is the continuation of the display and headunit wireing in the back passanger compartment.
Front system The wire termination of the front systems are properly terminated and connected to the front system.
Front system The wires for the front speakers are sealed with sealant.
Tweeter wireing The wires for the tweeters are mounted in parallel to the OEM wireing.
Front system wireing The front speaker wires are routed downwards the center console. You can hardly see them from the front, but you can identify them by the snakeskin and purple marks.
Front system wireing The front speaker wireing are routed to the left on the floor (purple).
Front system wireing The front system wireing are routed to the trunk area (purple).
Front system wireing The wires are routed to the backrest.
Front system wireing The wires were terminated and connected to the amplifiers.
Rearfill speakers wireing To fit the rearfill speakers into the car, adapters were mounted. Also the wireing (purple) was fixed to the OEM wireing and routed to the crossovers behind the seat rest.
Rearfill wireing termination The wires for the rearfill speakers are properly terminated
Subwoofer wireing This picture was taken after connection of subwoofer wire.
Subwoofer wireing The subwoofer wire is routed through the box, fixed to the box and afterwards to OEM wires. It is protected by snakeskin.
Subwoofer wire temination At the amplifier the subwoofer wire is terminated with ferrules.
Processor and crossovers wireing All wires for the processor and the crossovers are kept behind the backrest. There are some not used video cables on the right side for future usage.
Amplifier wireing All wires are terminated with ferrules.
Amplifier wireing All cinch wires are routed through the backrest and connected to the processor. On the bottom the power wires are routed to the passanger side to the power distribution.
Wireing cinch All cinch wires are custom made in exact length. Therefore just 4,1 m were needed for all 8 chanels.
Amplifier wireing fused properly The 10 sqaremillimeter power wires for the amplifieres are fused with 60 A. Ground is provided by the copper bar.
Other wires You have seen much more wires on the pictures. These are not used so far and planed for future usage.