Honda CRX del Sol

Latest News

European Finals again in Netherlands!

Next international event in Germany at the EMMA Headquarters in Neumarkt.

Systemlayout The Headunit and processor are connected optical. The amplifers are connect with cinch-wire. The 4 channel Infinity REF475A drives the woofers and the tweeters. The mono amplifier Infinity REF1600A drives the subwoofer on 1,5 Ohm. The Audison LR 435 is used for multimedia only.
Power wire fused properly A 50 mm2 (0 gauge) power wire with 4 meters length is passed from the battery in the front to the amplifier rack in the trunk. It is fused with an 150 Ampere fuse. There is no additional battery installed.
Components This diagram shows the components of the install. Powerwires (incl. ground) are on the right, cinch and speaker cables in the middle.
Power wire fused properly The main fuse (150 A) is located in the engine compartment.
Wiring Dietz power blocks are used for easy and neat wiring.
Main wire properly protected The wire terminations at the battery are properly protected
Wiring engine compartment Alle wires passing through the front-metal are protected by a grommet.
Power wire protected from damage Afterwards, the power wires are routed between subwoofer and firewall in splitloom.
Wiring Here one can see the ground (brown) & main power cable (red), and some signal cables (green).
Wiring This are the ground & main power cable, and some signal cables in the trunk
Wiring All wires are kept in splitlooms or snakeskin. Further wiring is documented at each component.
Wiring To make it easier to understand the wiring, every wire is marked with a colour code.