DampeningThere are three layers of different kinds of damping materials in the doors. |
|
Mounting panelsThe mounting panels for the speakers are made of MDF. |
|
Mounting panelSurfacer was used to optaine a smooth surface between the door panel and MDF. |
|
Mounting panelOn the back side, the mounting panel was milled out to give the speaker enough room to breath. |
|
Mounting panelTo mounting panel was protected by acryl color. |
|
Speaker installFinaly the speaker was fixed with M4 hexagon screws. |
|
Protection of speakersThe OEM grills were milled out in such a way, that at least all 25 mm a bar remains in the grill. |
|
Protection of speakersThe grills were coated with acustic clothing. |
|
Protection of speakersThe speakers are proper protected and the installation matches the OEM style. |
|
Wires properly terminatedAll speaker wires are properly terminated with wire sleeves |
|
Wireing midrange / tweetersThe wiring of the midrange speakers (and tweeters) starts at the amplifiers and are routed on the left side into the passanger compartment |
|
Wiring midrange/tweeterThe wires are routed to the transmission tunnel to the front. |
|
Wiring OEMIn the front, the wires are connected to the OEM speaker wires, which are routed through the door. |
|
Termination of speaker cablesThe speakers are connected with gold plated connectors and additional pole grease prevents the terminals from corrosion. |
|